LED cove lighting mouldings
A light cove conceals the light source behind a moulding profile, directing illumination toward the ceiling. Compare the profile shape and plan the lighting, support and electrical access together.
Start with the shape you prefer, then check the cross-section drawing and discuss the dimensions and lighting requirements for your project.
All dimensions are approximate. Confirm current dimensions and profile details with us before ordering, and check supplied products before cutting or installation.
A shaped profile shown beneath concealed upward lighting.
Drawing width × height: 7.6250 × 4.2488 inches
Dimensions are in inches, as confirmed by Everest. Values are reproduced as printed; confirm the selected profile before ordering.
A stepped and curved profile shown around an outside corner.
Drawing width × height: 3.1019 × 3.8303 inches
Dimensions are in inches, as confirmed by Everest. Values are reproduced as printed; confirm the selected profile before ordering.
A straight, stepped profile with flat horizontal bands.
Drawing width × height: 2.3772 × 4.6352 inches
Dimensions are in inches, as confirmed by Everest. Values are reproduced as printed; confirm the selected profile before ordering.
A shaped profile shown with concealed lighting above.
Drawing width × height: 3.1019 × 3.8303 inches
Dimensions are in inches, as confirmed by Everest. Values are reproduced as printed; confirm the selected profile before ordering.
A broad curved face shown beneath the light cove.
Drawing width × height: 3.1019 × 3.8303 inches
Dimensions are in inches, as confirmed by Everest. Values are reproduced as printed; confirm the selected profile before ordering.
A curved face with narrow lower trim bands.
Drawing width × height: 3.1019 × 3.8303 inches
Dimensions are in inches, as confirmed by Everest. Values are reproduced as printed; confirm the selected profile before ordering.
A profile with straight lower bands, shown following a wall offset.
Drawing width × height: 4.5073 × 3.0000 inches
Dimensions are in inches, as confirmed by Everest. Values are reproduced as printed; confirm the selected profile before ordering.
A layered profile with multiple horizontal steps.
No matching cross-section was supplied for this profile.
This sheet is labelled Cust and is a separate custom reference, not a numbered LC profile. Dimensions are in inches. Confirm the custom specification for your project.
Open custom drawing PDFProfile illustrations show appearance and lighting effect. Confirm dimensions and system requirements for your project before ordering.
For the arrangement in our installation guide, the strip sits horizontally on a support with its emitting face upward. Confirm the arrangement for your selected profile. Read the full installation guide.
Check the profile drawing, room measurements, ceiling gap, proposed light output and access to the power supply. Plan electrical work with a qualified electrical contractor.
Everest handles product and installation enquiries. Shop the LED light-cove collection at Nu Crown Mouldings.
Full supply and installation of mouldings and LED lighting, including electrical work, is available in the Greater Toronto Area only. For projects outside the GTA, contact us to confirm available supply options.
Explore more light-cove profiles and design ideas on the Light Coves website.
Send your location, room dimensions and the finish you have in mind.