Everest · Concealed lighting profile
LC-06A curved face with a detailed base
LC-06 adds small successive steps beneath a concave face. Those lower lines give the profile extra definition and a classic-to-transitional character. Consider it alongside decorative trim in a dining room, living room or entrance, with particular care at corners and joins.
- Drawing width × height
- 3.1019 × 3.8303 inches
Confirm current dimensions before ordering. Review the cross-section, support and required clearance for your room.
A closer look
The profile in detail
LC-06 · Motion studies
See the light and profile in motion
Silent presentation animations. Colours and light distribution are illustrative, not measured lighting specifications.
LC-06 · Warm lighting · installed view
LC-06 · Warm lighting · profile view
Plan your project
Before ordering
Measure each run and check the actual room corners before preparing the joins. Dry-fit the pieces and align the lower steps as carefully as the top. Correct the fit before applying finishing material; filler should preserve the profile’s lines, not hide a misplaced section.
In the illustrated flat-wall arrangement, the LED rests on a separate L-shaped support. Test the lighting through corners and connections before the moulding is finished. Keep drivers and controls accessible, and confirm the ceiling gap and mounting requirements for the selected system.
Ask about LC-06View source cross-section
Drawing width × height: 3.1019 × 3.8303 inches
Dimensions are in inches, as confirmed by Everest. Values are reproduced as printed; confirm the selected profile before ordering.