Menu

Everest · Concealed lighting profile

LC-02Classic curve, crisp upper steps

LC-02 white moulding wrapping an outside corner, with warm indirect light above.
Profile illustration. Finish and lighting are illustrative.

LC-02 combines a compact concave face with crisp upper steps and a defined lower edge. Its traditional detail works well with layered trim, while concealed ceiling light softens the overall effect. Consider it for a living room, dining room or entrance hall.

Drawing width × height
3.1019 × 3.8303 inches

Dimensions are approximate. Please confirm exact product dimensions before ordering.

Please confirm exact product dimensions before ordering. Review the cross-section, support and required clearance for your room.

Ask about LC-02View cross-section

A closer look

The profile in detail

Close-up illustration of the stepped and curved face of the LC-02 light-cove moulding.
Close-up illustration of the stepped and curved face of the LC-02 light-cove moulding.
Cutaway illustration of LC-02 showing its curved profile below the concealed light source.
Cutaway illustration of LC-02 showing its curved profile below the concealed light source.

LC-02 · Motion studies

See the light and profile in motion

Silent presentation animations. Colours and light distribution are illustrative, not measured lighting specifications.

LC-02 · Warm lighting · installed view

The camera moves along installed LC-02, with warm light directed toward the ceiling. 8 s.

LC-02 · Warm lighting · profile view

A slow orbit around the LC-02 cross-section shows the profile face, support and concealed warm lighting. 7 s.

LC-02 · RGB lighting

The camera follows LC-02 through the corners as the concealed lighting changes colour. 10 s.

Plan your project

Before ordering

In the illustrated flat-wall arrangement, the LED strip sits horizontally on a separate L-shaped support and faces upward. Plan the backing and the strip together. Follow the selected LED system’s requirements for mounting and heat management; the illustrated wood support is not a universal specification.

Dry-fit the moulding and check the glow from seated and standing positions before finishing. Keep the power supply accessible. The drawing’s approximate 2.5-inch gap is measured above the highest point of the moulding, not above the LED, and must be checked for the actual installation.

Dimensions are approximate. Please confirm exact product dimensions before ordering.

Ask about LC-02

View source cross-section

LC-02 source cross-section
LC-02 · Open source PDF pageDimensions are approximate. Please confirm exact product dimensions before ordering.

Drawing width × height: 3.1019 × 3.8303 inches

Dimensions are approximate. Please confirm exact product dimensions before ordering.

Dimensions are in inches, as confirmed by Everest. Values are reproduced as printed; confirm the selected profile before ordering.

Download cross-section PDF

Plan your order

Review the drawings and guides, along with return and warranty coverage.

Technical Resources · Return & Refund Policy · Lifetime Warranty